Car Amplifier Chrome
2009
 AUDIOBAHN 2 FARAD 24 VOLTS DIGITAL POWER CAPACITOR W/ 4 DIGIT DIGITAL DISPLAY US $68.15 
|
| Powered by phpBay Pro |
If i have to install a manual switch to turn my amplifier on/off in my car, what wire do i have to run through?
I currently have a remote wire, but its not working because the amplifier stays on while the car is turned off and it drains my battery, so i already bought a little chrome switch and just need to run a wire through it, please help!
It is apparent that your remote turn on switch inside the radio is not working. It's turning the amp on, but not off. You CAN put a switch on the remote wire. You'll have to make sure you turn it off before turning the car off or it could "pop" and damage the am or speakers. By "pop" i mean send a signal thru the amp that will surge your speakers and could damage them.
Another route is to have it repaired. Too much money if you ask me.
you could also use a remote turn on adapter. It's basically a relay that turns on and off sensing voltage from speakers. You 'll have to connect it as per the instructions. It connects power 12volts, ground, and a positive speaker lead. It sense a voltage change thru the speaker, which activates the relay and uses the 12volts to turn on an amp.
Email if you have any other questions
| Powered by phpBay Pro |
Comment