Amplifier Installation Kit
2010
| Powered by phpBay Pro |
Wiring Kit + Amp?
Is this a good wiring kit to go with this amp?
Phonics Digital PD-170 (PD170) 4GA. Amplifier Installation Kit 1800W
Features:
o 4 Gauge Amplifier Installation Amp Kit
o 1800W
* CONTENTS
o 17ft / 4 Ga. Red Power Cable
o 3ft / 4 Ga. Black Ground Cable
o 17ft / 18 Ga. Blue Remote Wire
o 15ft / Twisted Pair RCA Cable
o 3ft / Split Loom Tubing
o In-Line Clear Fuse Holder
o 25ft / 18 Ga. Speaker Cable
o 1 / AGU Fuse - 80 Amp
o 2 / 4 Ga. Ring Terminal - 5/16"
o 2 / 4 Ga. Spade Terminal - #10
o 10 / 6" Cable Ties
Amp: http://www.crutchfield.com/App/Product/Item/Main.aspx?showAll=N&g=120&i=158XM2002&tp=115&tab=features_and_specs
Is there anything in the wiring kit that should be replaced or missin anything, or is it all there?
The amp requires an 80 AGU. Is this kit fit enough to provide the amp with the right fuse?
its a good matching, its a cheaper brand cable, so ita likely not a "real" 4 ga, and it would in no way handle a 1800 watt system, but for your 500 watt system it is a good match. in fact the amp has 2x40 amp fuses or 80 amps total same as the cable. usualy the cable fuse is set for the limitation of the cable. so it will provide all the power that the amp would require. it looks like there is plenty of everything, so no worries there. yu may want more split loom to make it look better, but its not needed.
i do feel obligated to show you a link, these guys have great cables at unbelievable prices. i have thier 4 ga kit on a 800 watt system and it runs it beutifully, and its cheap. you buy factory direct, so there is no middle man.
take a look, you may like it better than the phonics digital kit. i know its better quality, but it may cost a bit more.
http://www.knukonceptz.com/productDetail.cfm?prodID=KLM-K4
| Powered by phpBay Pro |
Comment